Industries & Applications

Food industry

Comprehensive conveyor systems for the food industry. Our solutions cover stable horizontal transport of unpackaged products, as well as demanding processes such as washing, drainage, intensive aeration, and incline conveying on processing lines.

Process / Application Recommended models Engineering Justification & Material
Horizontal transport of products and packaging S1520/0870-FT S2540/1020-FT S2720/0980-FT S5080/1600-FT Flat top (FT) surface provides stable support and reduces the risk of small products jamming. Pitch selection depends on product dimensions and transfer geometry. PP for standard conditions; PE for moisture and low temperatures; POM for higher loads.
Washing, drainage and airflow S1520/0870-FG28 S2540/1000-FG32 S2720/0870-FG38 S5000/1600-FG27 Open area surface allows fluid drainage, airflow and limits the product contact surface. PE material is used in wet and cooling zones. Dedicated Safe variants for increased hygiene requirements. AM Silver, AM Gold and Detect options available upon request.
Transport on curves and bends C2500/1100-FG36-2.2 C2540/1270-FG42-1.7 Radius models allow direction changes without an additional intermediate transfer. The C2500 model enables the use of side guards and flights, whilst the C2540 provides a more compact radius. Material depends on load and temperature: PE for cold stores, POM for higher loads.
Incline and vertical conveying S1520/0870-FG28 S2540/1020-FT S2720/0980-FT S2720/0870-FG38 S5080/1600-FT S5080/1600-FT-EXW Straight, pop-up, scoop flights and side guards stabilise the product on inclines. The FG38 open area variant effectively combines incline function with fluid drainage. Accurate selection of flight and side guard height relative to the product is required; made of Safe / Detect materials for lines with strict hygiene control.
Cooling after thermal processing S2540/1000-FG32 S2720/0870-FG38 C2540/1270-FG42-1.7 Large open area supports intensive air exchange and uniform cooling of the product, including on radius sections. PE material for low temperatures; advanced HeatGuard material (+1 to +120°C) or other Hi-Temp options depending on the actual product inlet temperature.
Consult your selection

Bakery & confectionery

Comprehensive conveyor solutions for bakeries and confectionery plants. Our belts support the entire process: from the safe handling of raw dough, through post-bake cooling on radius conveyors, to transport in high-temperature zones behind the oven.

Process / Application Recommended models Engineering Justification & Material
Dough and pre-baking products S1520/0870-FT S2540/1020-FT S2720/0980-FT Flat top surface evenly supports soft and delicate products, eliminating the risk of damaging raw dough structure. Manufactured from PP or other food-grade materials; PE material is dedicated to cool and damp processes.
Post-baking cooling S1520/0870-FG28 S2540/1000-FG32 S2720/0870-FG38 C2540/1270-FG42-1.7 Flush grid / open area surface allows intensive airflow from underneath the belt, significantly accelerating the cooling process of baked goods (including on curved and spiral sections). Belt material must be strictly selected based on the product inlet temperature and direct contact time.
Dry post-oven sections S2540/1000-FG32 S2720/0870-FG38 S5000/1600-FG27 Open structure effectively aids cooling and heat dissipation, whilst a larger pitch allows for safe conveyance of bulky items. Strictly requires the use of specialized ThermoPro material (heat resistance up to +180°C in dry environments). An engineer must always verify the actual temperature and thermal exposure duration of the belt.
Processes involving water, oil or grease S2540/1020-FT S2720/0980-FT S2720/0870-FG38 Choice between Flat Top (FT) and Flush Grid / Open Area (FG) surfaces depends directly on whether stable product support or fluid drainage is required. Requires advanced Duramid material (operating range up to +260°C), resistant to demanding thermal processes and continuous contact with water, hot oils and greases.
Incline conveying S2540/1020-FT S2720/0980-FT S2720/0870-FG38 S5080/1600-FT Integrated flights and side guards enable safe transfer of bakery and confectionery products to elevated production line levels. Flight geometry and height selection depend on product fragility. Specialized materials are applied depending on zone temperature: HeatGuard (up to +120°C), ThermoPro or Duramid.
Consult your selection

Beverage production

Reliable transport of bottles, cans, containers, and multipacks at every stage of the bottling process. Our belts excel in the demanding environment of wet zones, during rinsing, and on high-speed conveyor lines, guaranteeing complete product stability.

Process / Application Recommended models Engineering Justification & Material
Conveying of bottles, cans and containers S1520/0870-FT S2540/0880-FT S2540/1020-FT S2720/0980-FT Flat top (FT) surface provides stable support for products with a small footprint as well as outer packaging. POM material is used for higher loads and to achieve low friction; PP material is recommended for standard conveyor sections.
Wet zones and rinsing S1520/0870-FG28 S2540/1000-FG32 S2720/0870-FG38 Flush grid (FG) / open area construction effectively drains water and prevents accumulation under the product. Use of PE material is recommended in humid environments and lower temperatures; POM material is deployed where high load capacity is key.
Direction changes (Curves) C2540/1270-FG42-1.7 C2500/1100-FG36-2.2 Radius belts (C-series) reduce the number of intermediate transfers and enable smooth container handling without the risk of tipping. Manufactured from POM material when higher belt pull is required; PP material for light-duty applications.
Incline conveying S2720/0980-FT S2720/0870-FG38 S5080/1600-FT Integrated flights and side guards stabilise individual containers and shrink-wrapped packs on inclined bottling lines. The FG38 flush grid variant simultaneously allows water drainage during elevation. Requires selection of flight and side guard geometry based on the package's centre of gravity; PE or POM material depending on operating conditions.
Conveying of shrink-wrapped packs and bulk packaging S5080/1600-FT S5080/1600-FT-EXW Large pitch (50.8 mm) and extensive accessories support the transport of heavier and wide secondary packaging. Material choice between POM or specialised high-impact material Strong HK - always subject to technical load and operating condition verification.
Consult your selection

Cooling & freezing

Advanced solutions for freezing tunnels, cooling tunnels, and product hardening lines. Engineered for low-temperature operations, our modular belts maintain full flexibility and impact resistance, while a high open area structure ensures an optimal, uniform airflow around the frozen product.

Process / Application Recommended models Engineering Justification & Material
Open freezing and cooling tunnels S1520/0870-FG28 S2540/1000-FG32 S2720/0870-FG38 S5000/1600-FG27 Flush grid / open area surfaces (FG) guarantee free and intensive air circulation, significantly reducing freezing or cooling times. Strictly requires PE material (operating range down to -40°C), which maintains elasticity and high impact resistance under deep-freezing conditions.
Freezing small products (Full support) S1520/0870-FT S2540/1020-FT S2720/0980-FT Used for conveying and freezing small berries, vegetables, or seafood. The flat top (FT) surface prevents small items from falling through belt openings and causing line jams. Additionally, smooth FT surfaces inhibit moisture freezing inside structural gaps. Must be manufactured from PE material.
Freezing spirals and curved conveying C2500/1100-FG36-2.2 C2540/1270-FG42-1.7 C-series radius belts enable the construction of efficient, compact cooling and freezing systems in spiral or curved configurations. The open grid design allows airflow from underneath. Material selection: PE is dedicated to freezing processes (flexibility on turns), whereas POM is used in cooling zones under higher tensile loads.
Consult your selection

Logistics & warehousing

High-performance solutions for logistics centres, sorting facilities, and automated warehouses. Our modular belts are designed to operate under heavy loads, ensuring the safe transport of parcels, cardboard boxes, plastic crates, and pallets, whilst maintaining a low coefficient of friction.

Process / Application Recommended models Engineering Justification & Material
Standard conveying of boxes, cartons and totes S2540/0880-FT S2540/1020-FT S2720/0980-FT Flat top (FT) surface prevents catching or snagging on the edges of cardboard boxes, courier parcels and plastic totes. PP material ensures optimal investment costs and low self-weight, whereas POM guarantees maximum load capacity for the line.
Incline and decline conveying S2720/0980-FT S5080/1600-FT Belt construction features integrated flights (straight, bent, or scoop flights) and side guards. This design completely prevents conveyed loads from slipping back at steep incline angles. Material selection: POM or PP (depending on loads and total conveyor length).
Impact zones and heavy-duty conditions S5000/1600-FG27 S5080/1600-FT Dedicated to areas where heavy parcels, crates or goods are dropped onto the conveyor from a height (e.g. sorter drop zones). The application requires specialized Strong HK material, featuring ultra-high impact strength, wear resistance and effective shock absorption for heavy loads.
Sorting and accumulation lines (Extra Wide) S5080/1600-FT-EXW Used on wide wide-body, merge, and sorting conveyors. Deploying dedicated Extra Wide (EXW) modules minimizes transverse bricklay joints, enhancing lateral stability, simplifying assembly, and providing high tensile strength during intensive continuous operation.
Consult your selection

Packaging industry

Efficient transport of boxes, trays, multipacks, and consumer units between packaging machines, labellers, and wrappers. Our modular belts guarantee perfect stabilisation of products with irregular bottoms, smooth accumulation, and reliable operation in compact line layouts.

Process / Application Recommended models Engineering Justification & Material
Small packaging and tight transfers S1520/0870-FT S2540/0880-FT Small pitch combined with a flat top (FT) surface provides excellent support for small boxes, sachets, and smooth, stable transfers between conveyors over compact drive sprockets. PP material for light-duty lines; POM material for reduced friction.
Inter-machine transfer on packaging lines S2540/1020-FT S2720/0980-FT Fully closed flat top (FT) design perfectly stabilises trays, blister packs, cartons, and containers with flexible or irregular bases. Material selection: POM for high loads and precise tracking, or PP for lighter packaging and cost optimization.
Incline and decline product conveying S2540/1020-FT S5080/1600-FT Integration of flights and side guards prevents packages from shifting or slipping on inclined sections. Model S5080 allows for steep incline angles and vertical conveying. Material: PP or POM (depending on line geometry and load); Safe / Detect variants for lines requiring foreign body inspection.
Wide products and accumulation lines (Extra Wide) S5080/1600-FT-EXW The use of dedicated Extra Wide (EXW) modules simplifies the construction of wide accumulation, buffering, and packaging conveyors by dramatically reducing the number of module joints. This provides higher transverse rigidity and high tensile strength during intensive continuous operation.
Consult your selection

Meat and poultry industry

Advanced conveyor systems for the meat and poultry industry. Our solutions support the direct transport of raw products, efficient drainage of fluids and fats, handling of sticky products, and trouble-free operation in rigorous washdown and cooling zones.

Process / Application Recommended models Engineering Justification & Material
Conveying unpacked products and portioning S1520/0870-FT S2540/1020-FT S2720/0980-FT S5080/1600-FT Smooth, flat top (FT) surface provides stable support for meat portions, poultry cuts, and larger primal cuts. PE material is dedicated to cold stores and wet areas; POM material is used for heavy-duty lines. Materials from the Safe and Detect series elevate line hygiene standards.
Drainage of water, fat and residues S1520/0870-FG28 S2540/1000-FG32 S2720/0870-FG38 S5000/1600-FG27 Flush grid (FG) open area enables continuous drainage of process fluids, blood plasma, and fat, while facilitating intensive CIP (Clean-In-Place) washing. PE material excels in wet and chilled zones; Safe / Detect variants are dedicated to areas with heightened sanitary requirements.
Sticky and adhering products S2720/0980-FT S2720/0870-FG38 S5080/1600-FT Using dynamic mechanical pop-up flights effectively minimizes the continuous contact area between raw product and belt. This facilitates automatic release and discharge of sticky, marinated, or plasma-coated products. Recommended material is PE (characterised by low adhesion) or high-hygiene Safe / Detect versions.
Steep incline and vertical conveying S2540/1020-FT S2720/0980-FT S5080/1600-FT Straight flights, side guards, and bucket/scoop flights completely prevent raw meat cuts from sliding down during inter-level transfer. Requires engineering selection of flight height relative to the size and geometry of conveyed meat items; manufactured in Safe / Detect technology for inspection-critical lines.
Curves in processing lines and abattoirs C2500/1100-FG36-2.2 C2540/1270-FG42-1.7 Open grid C-series radius models allow smooth direction changes along conveyor lines while maintaining full fluid and water drainage around bends. Material selection: POM material provides higher belt pull under heavy tensile loads, whereas PE material is dedicated to chilling and freezing zones.
Consult your selection

Pharmaceuticals & Cosmetics

Precise and ultra-clean conveyor systems for pharmaceutical, laboratory and cosmetics lines. The design of our small pitch belts guarantees perfect stability for miniature packaging, vials, blister packs and trays, eliminating the risk of tipping at transfer points and facilitating sterilisation processes.

Process / Application Recommended models Engineering Justification & Material
Small packaging and minor components S1520/0870-FT S2540/0880-FT S2540/1020-FT Small module pitch (from 15.2 mm) and a closed flat top (FT) surface provide smooth, stable support for small bottles, ampoules, boxes, and blister packs. This eliminates vibration and tipping risks during conveyor transfers. PP material for standard applications; POM material for higher load capacity and low friction.
Larger trays and tote boxes S2540/1020-FT S2720/0980-FT A fully closed, rigid belt surface limits lateral tilting for bulky packaging trays and tote containers along packaging lines. Material selection based on mechanical load criteria: PP or POM; sustainable POM BIO alternative available upon model compatibility confirmation.
Washing processes and air drying S1520/0870-FG28 S2540/1000-FG32 S2720/0870-FG38 Flush grid (FG) open area facilitates precise drainage of cleaning liquids in washers or unhindered airflow for targeted product drying. To maintain strict hygiene regimes in cleanroom zones, silver-ion antimicrobial options are recommended: AM Silver / AM Gold.
Incline conveying and product indexing S2540/1020-FT S2720/0980-FT S2720/0870-FG38 Integrated low flights help maintain uniform product spacing (precise pitch indexing) between packages and allow safe elevation transfer between production line levels. Material: PP or POM depending on conveyor geometry, incline angle, and loading parameters.
Compact direction changes C2500/1100-FG36-2.2 C2540/1270-FG42-1.7 Radius models (C-series) enable exceptionally compact conveyor layouts in cleanrooms and laboratory environments, eliminating redundant dead-plate transfers and reducing product jam risks. Material: POM where higher belt pull strength is required; PP material used in light-duty applications.
Consult your selection

Electronics

Precise conveyor solutions for electronics assembly lines, semiconductor manufacturing and automotive components. Our belts ensure perfectly flat and stable transport of delicate components in trays and bins, eliminating the risk of jamming or mechanical damage at transfer points.

Process / Application Recommended models Engineering Justification & Material
Small components and delicate parts in trays S1520/0870-FT S2540/0880-FT Closed flat top (FT) surface and extra-small module pitch effectively prevent tipping, micro-vibrations, or jams of small containers and precision assembly parts. POM material guarantees low friction, high stiffness, and precise tracking.
Production totes, KLT containers and bins S2540/1020-FT S2720/0980-FT Fully closed belt surface ideally stabilises heavier plastic assembly totes, transport crates, and storage bins. Material selection: POM provides maximum load-bearing capacity under heavy loads, whereas PP is used for lighter applications. Sustainable POM BIO is available as an eco-friendly option.
Compact and precise direction changes C2540/1270-FG42-1.7 Tight inside radius of the curve belt enables the design and construction of exceptionally compact radius conveyors in space-restricted assembly halls. Material selection: POM for higher cornering loads; PP for light-duty transport lines.
Incline conveying of totes and packages S2540/1020-FT S2720/0980-FT Dedicated integrated flights and side guards secure transported KLT totes and components during inter-level elevation changes. Accessory geometry is selected specifically to fit the dimensions and base profile of the conveyed load. Material: PP or POM depending on line loading and overall conveyor length.
Debris drainage and air blow-off zones S2540/1000-FG32 S2720/0870-FG38 Flush grid (FG) open surface allows unhindered drying or cleaning airflow as well as gravity drainage of fine process waste. Requires engineering verification of opening dimensions to ensure small electronic components do not drop through the mesh. Material: PP or POM selected according to mechanical line requirements.
Consult your selection

General Industry & Automotive

Heavy-duty conveyor systems for the automotive, machinery and metalworking industries. Our modular belts are adapted to operate in the harshest environments – withstanding high impact loads (from falling heavy parts), and offering high resistance to abrasion and constant contact with technical oils, coolants and aggressive industrial chemicals.

Process / Application Recommended models Engineering Justification & Material
Universal horizontal conveying S2540/1020-FT S2720/0980-FT S5080/1600-FT Flat top (FT) surfaces provide maximum stability for transporting machined parts, subassemblies, and plastic or metal assembly totes. Material selection: POM dedicated to heavier mechanical loads and friction coefficient reduction; PP material used in standard applications.
Heavy loads and demanding applications S2540/0880-FT S5000/1600-FG27 S5080/1600-FT S5080/1600-FT-EXW Designed for lines carrying heavier products and wide-body collection conveyors. These models feature significantly higher nominal mechanical strength, while the large pitch (50 mm / 50.8 mm) excels in tough operating conditions. Primary material is POM or specialized Strong HK compound.
Abrasion, high impact and aggressive environments S2540/0880-FT S2720/0980-FT S5000/1600-FG27 S5080/1600-FT Drop zones where parts are loaded with impact, or lines operating in the presence of aggressive substances. Mechanical design is strictly adapted to product geometry. Requires specialized Strong HK material (catalog range -40 to +80°C), which drastically extends belt service life. Engineers must verify specific chemical compatibility for each case.
Drainage and debris removal S2540/1000-FG32 S2720/0870-FG38 S5000/1600-FG27 Flush grid (FG) models enable gravity or pressurized drainage of machining fluids, coolants, swarf, and fine production debris. Requires prior verification of mesh opening size relative to component dimensions. Material: POM or Strong HK depending on total load and wear strip abrasion levels.
Direction changes and extra-wide conveying C2500/1100-FG36-2.2 C2540/1270-FG42-1.7 S5080/1600-FT-EXW C-series radius models deliver smooth directional changes without intermediate dead-plate transfers, while Extra Wide (EXW) modules enable the reliable construction of wide carrying surfaces with high transverse stiffness. POM material is used for higher belt pull forces. Belt width and frame support selection require precise load calculations.
Consult your selection
Scroll to Top